Door Access Control Power Supply 12V for Electric Lock Intercom Camera (Input 110VAC to Output 12VDC 3A)

Door Access Control Power Supply 12V for Electric Lock Intercom Camera (Input 110VAC to Output 12VDC 3A)

Introduction

• HBK-P02 power supply by HOBK is dedicated to access control system, which is suitable for all kinds of access keypads and building intercom equipments, especially for all types of electric locks. It can control electric locks via the signal wire or other switch signal output of the access keypad, which reduce the loads of the access keypad so as to reduce the hidden dangers.
• With working voltage of 3A, it can provide electric lock and access controller with 12VDC steady output voltage.

Features

• • Indoor use only.
  • Low noise design with ripple as low as 85mVp-p.
  • Compatible with electric lock, access controller, exit push button and intercom camera.
  • Can reduce the load of access controller and saving wiring to reduce the hidden dangers.
  • Time delay can be adjusted from 0 to 15 seconds.
  • With backup battery link, can support to add external battery.
  • Battery reverse protection: When the battery is connected reversely, the power supply will not be damaged. At this point, adjust the cathode and anode of the battery, and the power supply will recover in about 20 seconds.
  • With lightning strike protection function.

Specifications

• Input Voltage: 110VAC/60Hz
• Output Voltage: 12VDC
• Output Current: 3A
• Time Delay: 0-15s
• Backup Battery: Support
• Enclosure Material: SPCC
• Enclosure Finish: Spraying
• Enclosure Color: Grey
• Operating Temperature: -4℉ to +140℉ (-20℃ to +60℃)
• Operating Humidity: 10%-90%RH
• Product Weight: 3.97lbs
• Enclosure Dimensions: 7-33/64″x4-11/32″x2-15/16″ (191×110.3×74.5mm)

Package List