433Mhz AC/DC12-24V 2 Channel Wireless Remote Control Relay Switch Learn Encoding

433Mhz AC/DC12-24V 2 Channel Wireless Remote Control Relay Switch Learn Encoding

 

Features:

• GOOD WIRELESS RF SIGNAL,it can pass through walls, floors and doors,control receiver from any place within a reliable distance
• Using this product requires basic electronics knowledge, or experience with similar products before. Customer might need soldering skill and material for wiring in some circumstances.
• If the power source is not regulated, our receiver might show strange behaviour (immediately or in the long run), in this case, use a regulated power supply, it may help.
• WIDE USE It applies to remote control switch,access control,anti-theft alarm system,light lamp, fans,AUTO door, window, motor controller, water pump, industrial controller and any others security etc field
• Accepts wide power input range 12-28V AC or DC that is available at many places

Specifications:

Receiver:

• Operating Voltage: AC/DC12V-24V
• Operating Frequency: 433MHz
• Channel: 2
• Contact: NO, NC & COM
• Receiver Sensitivity: >-105dB
• Encoding Type: Learning
• About 30g

Transmitter:

• Operating voltage: DC12V
• Frequency: 433MHz
• Encoding Type: Fixed code
• Firing Range: 100 meter(open) in theory, 15%-30% in reality
• Shock resistance : 4.7M
• Battery: 12V/27A
• About 24g

Working Way:

• OUTPUT Working Way: Jog, inter-lock, self-lock
  (1). Jog (jumper A) – Pressing one button is working. Loosing your finger on the same button is stop
  (2). Self-lock (no jumper) – Pressing the button is working and pressing the button again is stop
  (3). Inter-lock (jumper B)- Pressing one button is working. Pressing another button is stop

Instructions:

Link the remote control:

• Press the program button on the receiver until the blue light turns on, and then release the program button, the blue light will stay on.
• Press a transmitter button, and the blue light will flash, at this time, it means finished linking.

Pairing Transmitter and Receiver:

• 1) After choosing the operating mode, press the learn button on the receiver until the blue indicator is lit up.
• 2) Press the button on the transmitter and then the blue indicator on the receiver blinks once and goes out, paired successfully.
• 3) Press the button on the transmitter again, you will hear a click sound from the relay. At this time, the pairing is finished.

Clear Code:

• Press the learn button on the receiver for 5 seconds until the blue signal indicator turns ON and then OFF, then release the key. At this time, the code clearance is completed, and pairing between the transmitter and receiver are removed.

Package:

• 1 x Receiver
• 1 x Transmitter

More latest product information of HOBK, please follow our official Twitter Account: @HOBK89016273.